• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

MGB MGB valve seals

Share this page

Carlbanan56

Carlbanan56

Senior Member
Country flag
Offline
Hi, as I have written I previs post my MGB 1975 is consuming quite a lot of oil. The compression is good, so then I suspect bad valve steam seals. I have read a bit and some people say that only new valve steam seals will not make a great impact on oil consumption. Should I replace anything else, valve guides, srpins?
 
The oil rings are probably the culprit being worn down a bit. I would replace all the rings with new and new valve stem seals. I know it requires a tear down but it can be done in the car with the head and sump removed. I don't remember if the mains have to be dropped on an 1800 for crank clearance, others will chime in. PJ
 
Back
Top