Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
35 Siddeley
Freshman Member
Offline
Hi All,
A bit of an odd request, but I've been advised to use MGB rear shocks to replace the Luvax shocks on my Armstrong Siddeley.
Does anyone have an MGB rear shock handy to measure mounting hole diameter and the distance between hole centres please? Also the offset between the mounting face of the shock and the eye on the end of the lever arm. ie if the shock is lying on its mounting surface on the bench, what is the distance between the bench and underside of the eye at the end of the arm.
I want to check whether this is going to be a bolt-on mod or require some re-engineering.
Cheers,
Paul.
A bit of an odd request, but I've been advised to use MGB rear shocks to replace the Luvax shocks on my Armstrong Siddeley.
Does anyone have an MGB rear shock handy to measure mounting hole diameter and the distance between hole centres please? Also the offset between the mounting face of the shock and the eye on the end of the lever arm. ie if the shock is lying on its mounting surface on the bench, what is the distance between the bench and underside of the eye at the end of the arm.
I want to check whether this is going to be a bolt-on mod or require some re-engineering.
Cheers,
Paul.