• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

MGB MGB 18V Distributor base plate screw

Share this page

B

burgundyben

Jedi Hopeful
Offline
Can anyone tell me what thread is the screw that holds the base plate into the distributor on a MGB 18V engine?

One was stuck solid and the PO mashed the slot, I got it out but I need a replacement.

Thanks

Ben
 
#10 - 32 tpi
I use an allen head screw to avoid the screwdriver hassle. Others may disapprove or have their own preferences.
 
Use stainless allen-head cap screws, eliminate the electrolysis. Or a dab of anti-seize and lockwashers.
 
Permatex... better living thru CHEMISTRY! :thumbsup: :jester:
 
Back
Top