Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Tullamore
Jedi Warrior
Offline
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
MGA MGA Antifreeze Turned to Goo?
- Thread starter Tullamore
- Start date
Share this page
I have found a similar situation from a replacement of the thermostat. Replacing the thermostat usually requires a new gasket but some people also use the gasket sealant for an extra seal. In my case it was like this because they used way to much and while tightening it all ran into the thermostat and plumbing network around it. From, there it dries and becomes part of the internal guts. Other then that Im not to sure. I do know when coolant looses its mechanical properties over time ( and years of sitting ) it will not gel up yet only turn a rusted color.
tony barnhill
Great Pumpkin - R.I.P
Offline
Were it mine, I'd first backflush the engine (while the radiator was in the radiator shop getting boiled, pressurized & repaired)....if backflush didn't work, I'd pull the engine apart & have a machine shop boil the block, head, & everything that the antifreeze touched.....to include the heater core!
& that thermostat cover forebodes bigger problems; so, sending engine to machine shop might be the best way to go!
& that thermostat cover forebodes bigger problems; so, sending engine to machine shop might be the best way to go!
Online
WOW! How many years has that engine been setting idle? Looks like a chemical reaction on the aluminum goose neck. Never saw one that bad.
I bought a new Elderado in 1983 and GM required putting pills in the radiator to prevent a similar reaction in their aluminum blocks and water pumps. That was on a 4100 engine. The pump still went bad around 50,000 miles.
Even so, that was still my favorite car.
I bought a new Elderado in 1983 and GM required putting pills in the radiator to prevent a similar reaction in their aluminum blocks and water pumps. That was on a 4100 engine. The pump still went bad around 50,000 miles.
