-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
T-Series MG TD Oil Filter Sources ?
- Thread starter PlaidMan
- Start date
Share this page
David_DuBois
Jedi Warrior
Offline
Charlie - Is the filter the old style that mounts vertically on the side of the engine, or is the later type that extends horizontally from the back of the oil pump? If the former, only Moss or Abingdon Spares https://www.abingdonsparesllc.com/ carries them. If the latter, filter inserts can be purchased at almost any auto parts store - Hastings P172, AC AC32, Fram CH814PL or the equivalent in any other brand. These filters are also used in the MGA and the early MGBs through around 67. The filters come with 2 or 3
gaskets. You want to use the gasket that measures closest to 0.088" thick. Make sure that the old gasket is completely out of the grove (a good light, mirror and dental picks are helpful) and that the new gasket is well seated in the grove before putting things back together.
If you have the filter that attaches vertically to the side of the engine, you can get a spin on adapter to replace it. It would cost about the same to purchase a spin on adapter from Bob Grunau (e-mail cgrunau@pathcom.com) and replace the whole thing. Bob also makes a spin on adapter for the later engines.
Cheers,
gaskets. You want to use the gasket that measures closest to 0.088" thick. Make sure that the old gasket is completely out of the grove (a good light, mirror and dental picks are helpful) and that the new gasket is well seated in the grove before putting things back together.
If you have the filter that attaches vertically to the side of the engine, you can get a spin on adapter to replace it. It would cost about the same to purchase a spin on adapter from Bob Grunau (e-mail cgrunau@pathcom.com) and replace the whole thing. Bob also makes a spin on adapter for the later engines.
Cheers,