• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Measurement required please.

malbaby

Jedi Warrior
Country flag
Offline
After the distance from the front face of the gearbox bell housing to the centre of the "H" dash support gear lever exit hole.
 
If no one does this before I get home from work I can do this tonight....Would a measurement from the gearbox bell housing to shifter in neutral be ok as I don't have the body on the frame yet.

Cheers
Tush
 
Back
Top