• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Lucas RB340

Share this page

Jeepster

Jeepster

Jedi Trainee
Country flag
Offline
I have been sorting a few issues with the charging on my BJ8 and the RB340 voltage regulator.

To adjust the regulator you have to rotate one of the three dials at the top. The manual suggests using a special adjustment tool that I assume was in every BMC mechanics tool box back in the 60s but I can't find one anywhere.
Any ideas on where I could source one or maybe an alternative?
 
Try Rogers Motors, he has a lot of unusual NOS stuff
 
No tool required all you need is a straight blade screwdriver of the right width . Use it like a small lever on the edge of the wheel you want to turn against the back of the regulator they turn easily .
 
Healey Nut said:
No tool required all you need is a straight blade screwdriver of the right width . Use it like a small lever on the edge of the wheel you want to turn against the back of the regulator they turn easily .
Click to expand...

:iagree:---That is what I also do when FORCED to adjust one.-:highly_amused:
 
Back
Top