• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

King pins

Share this page

Welding would work. But hey they may not be cracked. The spindle are another story. you kinda have to replace them. just check for cracks. The threads for the fulcrum pins are the things that wear on the A-arms. Once you get the fulcrum pins out you will likely find the arms are worn not the pins.
 
In answer to the question about wanting to get a Sprite inverted, the answer is a resounding "NO."
See attachment.
Although this wasn't due to a spindle failure, I had one break in the past with much the same result.
Jeff
 

Attachments

  • 153221-Rollover2.jpg
    153221-Rollover2.jpg
    26.5 KB · Views: 86
Showing off with those low altitude snap rolls again. You're such a show boat, Jeff.

Seriously, I am glad you came out of that still able to type.

morris
 
Back
Top