• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Jackall ram rebuilding

Share this page

Adam58

Adam58

Jedi Hopeful
Offline
I have a leaky Jackall ram on my MG YB. I know that I have to be careful not to bend or dent the tube. I used the bracket on the car to try and dissassemble it but the top fitting is too tight for the torque I'm willing to apply without knowing what I am doing. I also don't have spanner for the gland nut but probably can aquire one. I do have a set of new seals if i can get it apart.

I called Apple Hydraulics and they somewhat bruskly informed me that they don't touch these things.

My questions are: A) Can I rebuild it myself and if so, what are the potential pitfalls and B) What shop will rebuild it and at what price?

Thanks!

Adam
'53 YB, etc.adam58
Approved Member

Posts: 4
Joined: Sat May 19, 2007 6:24 pm
Location: Encino, CA
Private messageTop
 
Back
Top