• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Interior Trim question on a '77 midget

Share this page

77_MG_Midget

77_MG_Midget

Jedi Trainee
Offline
I've finally gotten to the point in my rebuild of starting to reassemble the interior. But, I don't remember what covers the "B" pillars? Surely there must have been something, they wouldn't just leave the slots for the plates in the "B" post (that the striker plate screws into) open, did they? Moss doesn't list a trim piece in their interior kit, and I don't seem to have anything "extra" laying around, but I also don't remember them just being painted metal with the slots exposed.
 
If you're talking about the piece that the latch plate screws go into, I don't have any covering on mine. The weather stripping for the door slips over the lip, and there's a small piece of trim about 1" wide that's part of the weather stripping that faces toward the seatbacks. Hope that helps, and I can get get a picture if that would help more.
-Dave
 
I couldn't speak intellegently about it Dave. I wasn't exactly sure where the "B" pillar was. Guess I've learned something.
JC
 
My 1970 car had vinyl glued on the back of the B-post
 
Back
Top