• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Interior Rear Panel Removal Thread

Share this page

crya

crya

Member
Offline
Hi. Anyone have a thread link on how to remove the rear panels on a '64 BJ8?
I've removed the obvious nuts, screws, and bolts, but the panel is still held to the rear partition? by some mysterious fastener. Please don't tell me it's the two screws I see on the inside of the wheel well.

Thanks. Go Pats!
 
It's the two screws you see on the inside of the wheel well. Actually they are not that difficult. Jack the car up makes it easier to access those screws.
 
Just in case you may want to, have to remove the rear seat back, there are three bolts holding that in place.

Gooooo on Pats!
 
Back
Top