• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Interior Question

Share this page

Basil

Basil

Administrator
Staff member
Boss
Offline
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by: Paul I was reading the email about the interior kits. I am redoing my interior on my roadster and there are fabric covered metal pieces on the sides right behind both seats. The originals are held in place with spring clips but the replacements parts do not have the clips affixed in place. The metal is drilled but I do not understand how they attach to the side of the car. Any help you can offer? Paul.<hr></blockquote>

Any chance you could use the clips from your original piece? Also, tell us which piece exactly you are talking about. Refer to the picture below. Is it #13?

Basil

interior.jpg


[ 05-20-2002: Message edited by: Basil ]</p>
 
13 it is. the clips do not seem to come out (or as often the case, I do not know what I am doing!) and some have rusted and broken. Whose the guru and where's the mtn? Thanks, Paul.
 
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Paul:
13 it is. the clips do not seem to come out (or as often the case, I do not know what I am doing!) and some have rusted and broken. Whose the guru and where's the mtn? Thanks, Paul.<hr></blockquote>

Piece of cake...call Terry's Jaguar at 1-800-851-9438 or 800-447-4587 and tell them you need the clips that hold that piece on. If they don't have it, bet they can tell you where to get them.


Basil
grin.gif
 
Back
Top