• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Installing front anti-rollbar poly bushings

Share this page

T

tdskip

Yoda
Country flag
Offline
It looks like I need to cut the bushings to get them onto the anti-roll bar since they won't fit over the bar ends.

Am I missing something?
 
Re: Installing fron anti-rollbar poly bushings

Or can I heat them up in hot water to make them more ply-able???

They are the upgraded poly ones from Moss...
 
Re: Installing fron anti-rollbar poly bushings

Yeah a nice bath of hot water should do the trick plus some lube on the bar itself.
 
Re: Installing fron anti-rollbar poly bushings

As an FYI - heating them up to a point where the water got hot, but not boiling, worked like a charm.

It also helped on the new bar link end install...
 
Back
Top