• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

installing AP brake booster

Share this page

E

eurobiketrash

Member
Offline
help! I guess I cannot think outside of the box! I am trying to install a replacement brake booster on my 66 healey. Instructions dont tell me anything. I know it surely wont go in the stock location and I am unable to come up with a safe solution. Anyone have a photo of a proper install? Thanks in advance!
 
I know it surely wont go in the stock location

Why??? don't you have a set of original mounting brackets they may need to be straightened out and made to fit.--Keoke
 
I will look again at brackets but I dont think there is room to put this booster in the original location due its length and the attitude it is suppose to be sitting.
 
It will fit. The unit can sit at X degree angle. I don't remember what the number is but it fits. And as the previous post, you just bent the mounting brackets a little. I suggest putting the brake lines on the unit prior to mounting and then connect the other ends, as they are out in the open a little more. You do have to bleed the unit also.

Jerry
BN4 with brake servo
 
Back
Top