• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Inside the horn and turn signal control head.

karls59tr

Obi Wan
Bronze
Country flag
Offline
I'm very carefully taking apart the control head with the aid of Randall's post "The TR3 Control Head." What causes the stator tube to not keep the head from turning and cause the control head wires to twist and bunch up?
 
I'm very carefully taking apart the control head with the aid of Randall's post "The TR3 Control Head." What causes the stator tube to not keep the head from turning and cause the control head wires to twist and bunch up?
The stator tube is held in position by the tube nut at the bottom end of the stator tube. The control head is held from turning by the tube from the control head that is inserted into the stator tube.
Charley
 
The stator tube is held in position by the tube nut at the bottom end of the stator tube. The control head is held from turning by the tube from the control head that is inserted into the stator tube.
Charley
Is it possible that the tube from the control head can work itself loose from the stator tube and move around? If so can it be "staked" somehow to keep it in place?
Karl
 
Is it possible that the tube from the control head can work itself loose from the stator tube and move around? If so can it be "staked" somehow to keep it in place?
Karl
In the top of the stator tube there is a notch that a raised portion on the tube from the control head fits into. As long as the stator tube is not broken then the answer is NO.
CHARLEY
 
Back
Top