• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

In case you wanted to know-rockerarms

Share this page

jlaird

jlaird

Great Pumpkin
Country flag
Offline
We charge $128.50 for the assembly. Delivery would be approx. two weeks after receipt of core because we would need to send the shaft out for hard chrome plating and also to bore and bush the rocker arms.


https://www.rockerarms.com/Austin.htm


This is for an A 40 engine the one we all have.
 
What you have to be careful about alot of rebuilt assemblies, is that they use a oversized shaft, and ream/hone out the bushing in the rocker arms and the pedeastals for the oversized shaft, their price reflects this type of rebuild, which is OK, as long as you know you now have a assembly that has been modified form stock specs. Alot of fols rebuld rocker assmeblies this way, it cust down on loabor time and cost, and it allows you to get a end product that coast less, you just need to know that, because no way in God's green earth is someone going to install new bushings and new shaft for that price. Nost inexpensive repacement rebuilt rocker arm assembleies offered by vendors are these O/S shaft deals.
 
Assume Hap, that your comments are directed toward the race crowd. Should this not be fine for my application?
 
Back
Top