• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

I'm new to this forum.

Share this page

K

krag50

Freshman Member
Silver
Offline
I would like to say hello, I'm new to the world of web forums so please forgive me if I mess this up. I'm in the third year of a restoration on a 1960 BN7. I've looked at some of the posts and decided to join as the info that is posted is outstanding. As I learn how to better use the site I will ask for and hopefully contribute infomation /ubbthreads/images/graemlins/wink.gif
 
Hi Krag,
Welcome! It’s a pretty good bet you’ll like the place, I do. I imagine we’ll be hearing quite a bit from you, at least ‘til the spring thaw. /ubbthreads/images/graemlins/cryin.gif The FAQ section above should give you some good tips. Also check out the knowledge base for stuff like attaching photos.
 
Hi Krag, I am also a little over 2 years into restoring a 62 BN7, actually according to the numbers it's an early 61 but wasn't sold till 62 , so it's titled 62. Would like to see some pictures and I probably could ask you about a thousand questions myself. Have you got her running yet? Bob /ubbthreads/images/graemlins/cheers.gif
 
Hello krag50, welcome to the forum. I agree with what GregW says, it's agood place for info all you have to do is ask. I also have a 60 BN7, it is going through some minor refurbishment (taken 4 years so far). Regards, BUNDYRUM.
 
Thanks all. My Healey has been down to the last nut and bolt and is now going back together. I bought it three years ago and it hadn't been ran for 24 years(1982). It had been in storage after a rear-end collision. At this point all structural components, running gear and mechanicals have been restored and are installed. I'm putting the instrument panel back in and then I will run it to do final tweaking before adding the sheet metal panels and interior. I'll try and get some pictures posted in the next day or so.
 
Back
Top