• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A I need some small TR3 parts

Share this page

M

mallard

Luke Skywalker
Country flag
Offline
Can anybody help me getting these parts?

I'm looking for some of the thumb screws for the wedge mount side curtain. I don't care about the condition of the chrome. I trying to find a couple with good knurling on the sides. All the ones I have look like they were tightened with a pair of pliers.

I need one original door finisher pull end. I have a set of ends from TRF that don't look the same. Also they are brown chrome plated not silver.

I need one screw for the TR2 TR3 brake and license plate lamp. This is the screw that would hold the lens to the base.

I need three of the oval, chrome screws that hold side curtain sockets to the door.

I know some of these parts are available from the big three, I just want to make sure they are all the same.

Let me know if you have any of the parts needed. I will purchase or make a trade. Thank you.
 

Attachments

  • 24349.jpg
    24349.jpg
    78.9 KB · Views: 275
Keith-

It may take me a little while, but I have one or two wedge receivers somewhere. Yours if you need them. Then again you may not want them as I'm not sure of the condition but I remember the screw may need some coaxing to come out at this point.

Randy
 
Thanks Randy let me know what you find, no hurry.
 
Hi Keith,

You may want to check out "Macy`s Garage" (www.macysgarage.com). Mark Macy (Owner) caries a bunch of hdwr. for TR2 & 3s.

Russ
 
Back
Top