• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

I need a dimension on a front shock for BJ8

Share this page

J

John_Progess

Jedi Warrior
Country flag
Offline
If someone has a front shock off their car, I need the perpendicular distance from the centerline of the hole in the arm that attaches to the suspension to the base of the shock when the arm is as high as possible. Extend the arm to its hightest position, with the shock on a flat surface measure the distance from the centerline of the hole to the surface. Thanks for your help.

John
 
/ubbthreads/images/graemlins/iagree.gif

Checked mine, from a BJ8. It too is 6.5 inches on a freshly rebuilt (by Denis Welch) one not yet installed.
 
Back
Top