• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

How my engine bay looks now

Share this page

philman

philman

Jedi Knight
Offline
I put this in my engine bay to finish up the wiring and exhaust. The wiring harness in the car is a non-ac harness so I am adding in a home built fan control module (I hope to use SSR's). Eventually my custom built FI engine will be in this car and this engine will be in my FHC. I can't go back to work until I can wear shoes on both feet so I am finding things to do...
 

Attachments

  • 10821.jpg
    10821.jpg
    59.2 KB · Views: 235
This is the carb set up currently in my FHC.
 

Attachments

  • 10822.jpg
    10822.jpg
    52 KB · Views: 236
What sort of FI system are you planning on using? I'm thinking of doing some sort of FI instead of the usual 4-bbl conversion.
 
My machine shop guy took a rover fi set up modified it for a MAP sensor, did some stuff with the injectors (I'm not sure all that he did there) and heads and had a gm ecu remapped for my application (cam timing/duration, flow rates, etc). Right now I'm waiting for him to find time from his day job to finish the three engines he has from me.

I think now you can get a throttle body system to replace the four barrel carb and keep the same manifold. That might be an easier mod, because then all you would have to do is map the ECU.
 
Back
Top