-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hobart 180 opinions please...
- Thread starter budk1953
- Start date
Share this page
AweMan
Jedi Knight
Offline
Good machine:
You will want to get a gas bottle 75/25 Argon/C02 for steel NON cored wire. If you plan to weld Aluminum or Stainless with it you will need a bottle of pure Argon too. The cored wire works good for heaveyer metal. But not so well on fenders or floor pans ETC. For body work I use .023 NON cored wire. The 180 Has a better duty cycle than the 140 does, but either machine is fine for light work. Antispatter spray is Handy to have and use. practice, practice, and practice make perfect.
Have fun.
Kerry
You will want to get a gas bottle 75/25 Argon/C02 for steel NON cored wire. If you plan to weld Aluminum or Stainless with it you will need a bottle of pure Argon too. The cored wire works good for heaveyer metal. But not so well on fenders or floor pans ETC. For body work I use .023 NON cored wire. The 180 Has a better duty cycle than the 140 does, but either machine is fine for light work. Antispatter spray is Handy to have and use. practice, practice, and practice make perfect.
Have fun.
Kerry
