• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR4/4A Help with differential TR4A

Share this page

tban52

tban52

Freshman Member
Offline
Hi all,

I am wondering if anyone can tell me how to remove the inner axle shaft from the driving flange in order to replace the oil seal? Will it tap out? Should I be using some kind of gear puller? Also, what are the torque values for the three shaft nuts? My manual is kinda vague on this....
Thanks in advance.
Terry
 
Tban52,
To keep from banging the end and flaring the threads, take it to a machine shop and have it pressed out and put the seal back in and pressed back. They will have a much better idea what needs to be done, if you have never done this before and I bet the cost will be very reasonable. I couldn't do with out the press.

Wayne
 
Back
Top