• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Help please? Front sway bar mount

Share this page

fabmandan

fabmandan

Jedi Hopeful
Offline
My car came with a front sway bar, but the mounts on the A-arms were never installed. Could someone post a picture and the distance from the fulcrum pin to the sway bar mount?
Thanks
 
Best I can do. There should be three holes right beneath the spring for the bracket.
2996bb3aac2a8fb59c77ccbc74e0181d0_large.jpg
 
Do your A-arms not have the holes? Or are you missing the end links? I have the bar / links off my car at the moment, let me know if you need a close-up for reference.
 
zimmy said:
i dont think 62s had sway bars as stock ....
ull probably have to drill ....z
Click to expand...

IF you have to drill, make backing plates to fit up inside the A-Arm. .. you'll want the additional strength... i made a template with a piece of card stock, then shaped the 1/4" plate to that to fit up inside...
 
I am going to have to drill holes. And the reinforcing plates are already there. I keep finding the strangest things on this car. The PO had the sway bar on the car with no end links. Just hangin' in the breeze.
Duncan, a close up and a measurement from the fulcrum pin to the plates or the first hole would be great.
You guys are awesome. Thanks.
 
fabmandan said:
The PO had the sway bar on the car with no end links. Just hangin' in the breeze.
Click to expand...

well the box did say <span style="text-decoration: underline">sway</span> bar :thumbsup:
 
Back
Top