• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Help! I need some pictures.

Share this page

T

tomnanney

Jedi Hopeful
Country flag
Offline
I recently replaced the rubber seal on the bottom of the windshield. I didn't take any pictures because it looked so simple to put it back in! Wrong! I went to reinstall it and can't get the rubber to fit right at the windshield post and down the door jam. Can someone send me some pictures of how it suppose to look. Thanks again for all your help! I need to get the Healey(67 BJ8) back on the road.
tom
 
The pictures are great. One more question. On the rubber that goes over the windshield post and then into the door jam. Is the rubber channel still on the seal or has it been cut off and the seal is flat? Hope that makes sense.
 
tomnanney said:
The pictures are great. One more question. On the rubber that goes over the windshield post and then into the door jam. Is the rubber channel still on the seal or has it been cut off and the seal is flat? Hope that makes sense.
Click to expand...

Tom,
It was a while ago that I installed the rubber.
Do you have a photo showing what your referring to?
Or maybe others will chime in with the answer.
Roger
 
Roger,
I don't have a photo, but what I am talking about is the rubber part of the seal that fits into the bottom of the windshield. Is that part cut off the bottom of the seal when it goes over the windshield post and into the jam.
 
Back
Top