-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
heat shield
- Thread starter 6773
- Start date
Share this page
racingenglishcars
Darth Vader
Offline
Your choice, Aluminium or Steel sheet.
SilentUnicorn
Yoda
Offline
I bought one from ashley hinton, cant seem to find a link for it now. Very nice piece fit was beautiful.
What needles do you plan to use?
mark
What needles do you plan to use?
mark
SilentUnicorn
Yoda
Offline
https://www.teglerizer.com/triumphstuff/75w_heatshield.htm
anad a full size template!!!
https://www.auskellian.com/paul/links_files/heat_shield_template.pdf
from here https://www.auskellian.com/paul/links_files/carb_heat_shields.htm
ebay UK
https://cgi.ebay.co.uk/CARBURETOR-HEAT-SH...1742.m153.l1262
as far as needles i was hoping to hear your plan mine is still to rich.
mark
anad a full size template!!!
https://www.auskellian.com/paul/links_files/heat_shield_template.pdf
from here https://www.auskellian.com/paul/links_files/carb_heat_shields.htm
ebay UK
https://cgi.ebay.co.uk/CARBURETOR-HEAT-SH...1742.m153.l1262
as far as needles i was hoping to hear your plan mine is still to rich.
mark