• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

HD Carb Jet Adjusting Screw Question

Share this page

HealeyDave

HealeyDave

Senior Member
Bronze
Country flag
Offline
Ok, dumb question of the day. I've searched all over, and I know I saw it somewhere, but of course can't find it when I need it:
HD6 carb mixture adjustment: On the jet adjusting screw (as Norman Nock describes it) (not the slow run valve), which rotation direction makes the mixture 'lean' and which makes it 'rich'.
Thanks
Dave
BN7
 
"To enrichen the mixture the # 18 screw should be turn In." - Shop Manual.
" Turning the screw clockwise enrichens the mixture" - Driver's Handbook.

Dave.
 
The works setting was 35-38 thou below the jet bridge and if everything else is correct the car will run perfectly in that position.
 
Back
Top