• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Hay Jolly

Share this page

jlaird

jlaird

Great Pumpkin
Country flag
Offline
What did you all use when you sealed up this Gold transmision> It's good stuff. Haveing a heck of a prob with the detent slugs and shift rods but boy oh boy does this look fine gear wise. Appreciate.
 
When my students were taking it apart I looked at it and told them to just put the side cover and tail shaft back on. I did not want them to practice on what looked like a fresh gold seal box. My guess is the sealer was brush-on permatex. Students can get pretty sloppy with the stuff.
 
It really really is good stuff. I wanted to make sure I used the same.

Now if I can get these shift shafts and detents freed up I'm good to go.
 
Back
Top