• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Harmonic balancer threads

Share this page

TulsaFred

TulsaFred

Jedi Warrior
Country flag
Offline
Need to pull thembalancer of my 1275.
I've got a bolt puller, but none of the boltsmwill thread into the puller holes on the balancer.

Doesmayone know the correct thread and bolt size?

Thanks
Fred
 
It may just be better to just unscrew the original bolt (all but about 3 threads) and let your gearpuller rest against that. Pulling it the last bit off should be pretty easy.
BillM
 
Turns out the threads are 5/16-24
They were just a bit boogered up, so I had to chase the threads with a tap

Fred
 
Back
Top