• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

hardware question

Share this page

Psevins

Psevins

Freshman Member
Offline
I've taken a break from my Tr3 for a bit and started playing with reassembling my 1972 GT6. Unfortunately the guy who took it all apart didn't label or separate the hardware. What size and grade bolts hold the drive shaft to the transmission? I've looked online but haven't found an answer I'm confident is correct. I'll probably just buy new ones in town this week instead of digging through the coffee can of surprise.

Thanks!
Corey
 
While I am sure any 3/8 UNF bolt would work, aren't those the "special" bolts? Part number 107960, as I recall. I think that they are special because they have a specific shoulder diameter and possibly threaded length, but could be wrong. The GT6 may not use them, but the TR6 and Stag do. Available at TRF and probably other places.
 
It is a short bolt and shouldered as stated.
That you prolly can't find at your local ace.
 
Back
Top