-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Grease questions
- Thread starter 71tr
- Start date
Share this page
R
RonMacPherson
Guest
Guest
Offline
white lithium grease for the wiper motor.
A good high temperature moly grease for the throwout bearing tube and carrier contacts.
My best experience has been with Honda(auto dealers). They sell a small plastic bottle for not very much, it works good, lasts a looooooong time and is easy to apply.
A good high temperature moly grease for the throwout bearing tube and carrier contacts.
My best experience has been with Honda(auto dealers). They sell a small plastic bottle for not very much, it works good, lasts a looooooong time and is easy to apply.
TR3driver
Great Pumpkin - R.I.P
Offline
I use ordinary wheel bearing grease in the wiper gearbox, seems to work well and last longer than the factory grease. Mine has moly in it, so is black.
On the throwout tube, I don't like to use grease at all, as it seems to collect clutch dust over time, making it both abrasive and sometimes sticky. I use "dry moly" instead, which seems to work very well for me.
https://www.crcindustries.com/hd/content/prod_detail.aspx?PN=03084
Dow Corning "Moly-Kote" is similar.
On the throwout tube, I don't like to use grease at all, as it seems to collect clutch dust over time, making it both abrasive and sometimes sticky. I use "dry moly" instead, which seems to work very well for me.
https://www.crcindustries.com/hd/content/prod_detail.aspx?PN=03084
Dow Corning "Moly-Kote" is similar.