• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Girling Clutch MC Mystery?

Share this page

K

karls59tr

Obi Wan
Bronze
Country flag
Offline
I have Clutch MC that was installed on my TR3A by the PO. It has "TVS-Girling" on the side an3/4 below it. Anyone know what car this might be from and if Girling 3/4" rebuild kits are still available?
 
Isn't the .75" cylinder as original on the TR3A (and lots of other cars? I had to rebuild the clutch MC on a Jaguar and found that the TR3A kit I had on the shelf worked fine.
 
Not much of a mystery really. I should have googled it first.Turns out the MC is from a 69-70 TR6 and rebuild kits are readily available. I think after 1970 the TR6 went to 5/8" or .70. The stock TR3A MC was linked to the remote reservoir along with the brake MC.
 
Back
Top