• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Gearbox Identity

Share this page

blueA

blueA

Member
Offline
Gday Ive just bought a heap of parts on OZ Ebay including a gearbox the seller says is MGA.The slave cylinder is positioned at the top (12 oclock) and it has MGA3815 punched into casing near the dipstick. I apologise if this has been answered recently. Tah Bob
 
A member from another board has identified it as ZA Magnette. Bob
 
I think (but am not sure) that it also may be a ZB Magnette.

The insides are identical to MGA.
 
Gday here is some more infomation on this gearbox.It has an electrical pickup at the base of gearstick remote.There are two machined areas for a slave cylinder (12 + 7 oclock ,7 oclock has not been used on this box).1H3153 1H3154B SM these numbers are cast inside bellhousing.Thanks for reply Bill Bob
 
Back
Top