TR2/3/3A Gearbox cover 60 TR3A

[auggie]

Does anyone have a picture of the gear box cover they can post? Modifications to cover by previous body man don't seem right, should there be wings where the cover bolts to the firewall?

Thanks,
Auggie

 

[MGTF1250Dave]

Aloha Auggie,

If you are asking about the sheet metal cover over the gear box in a TR3, yes there should be a flange at the front with holes to bolt it to the fire wall.

 

[Tr3aguy]

hope this helps...

 

[auggie]

Tr3aguy,

Is the right side that cannot be seen the same as the picture of the left side?

Thanks,
Auggie

 

[TR4nut]

JP will have a better answer, but as I recall on the starter side the flange at the firewall is different - there is no flange where the starter bumps out. At least that's what I think without looking at it.

 

[DNK]

Tr3aguy,

Is the right side that cannot be seen the same as the picture of the left side?

Thanks,
Auggie

 

[Tr3aguy]

Auggie,
I sent you a e-mail....hope that helps.

 

[luke44]

I also have that piece out and easily accessible for a photo. Hope these help.

 

[Tr3aguy]

Dang I would eat a taco off of that thing....it is so clean!!!

You car is looking great...road trip to DC when you are done to help finish mine....ha

 

[TexasKnucklehead]

The not so shiny cover has two snaps on either side. What are they used for?

 

[Tr3aguy]

I believe it was to hold the carpet snugly to the tranny cover.....at least that was the story the late father in law gave me, when i ask?