Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Anybody here know of someone who has mounted a TR3 body on a TR4(notA)frame? I would like to know if it is somehow doable without rolling the front fenders or having flared front fenders. The car would be running wire wheels and stock tire size.Tires might stick out beyond fender well. I know the rear clearances would'nt be an issue because a TR3 diff could be used. CK
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
-
When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
TR4/4A Further to TR3 Body on a TR4 frame?
- Thread starter karls59tr
- Start date
Share this page
Offline
The TR4 frame is only wider at the front, where "supplementary" rails were added outboard of the main rails to increase the track.
You might find this thread on the TR Register Forum to be of some use.
If you look at pictures of the fabled TR3 Beta (at the moment, I can't find any on the Internet), you'll see how the front and rear wings were widened. If you end up doing this, that would be pretty easy with a set of fiberglass fenders, I'd think! Randall has noted in other posts that the wider TR4 axle seems to fit ok under the TR3 body; I'm not so sure about the front wheels, though!
You might find this thread on the TR Register Forum to be of some use.
If you look at pictures of the fabled TR3 Beta (at the moment, I can't find any on the Internet), you'll see how the front and rear wings were widened. If you end up doing this, that would be pretty easy with a set of fiberglass fenders, I'd think! Randall has noted in other posts that the wider TR4 axle seems to fit ok under the TR3 body; I'm not so sure about the front wheels, though!