Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
philman
Jedi Knight
Offline
on a previous thread i started you guys helped me troubleshoot my fuel guage circuit. i'm a little slow on some projects, it's been cold and rainy with snow here.
today i pulled the fuel sending unit to replace it (we had determined the electrical circuit was good) and i found the float was fouled by a coiled spring -- of the type used to stop gas siphoners. stuck in the full up position. I figured that i may as well replace it anyway, since i had gone this far and now the circuit works.
thanks for all the help in troubleshooting. my next project is to re-install the heater. previous owner removed for autocrossing.
today i pulled the fuel sending unit to replace it (we had determined the electrical circuit was good) and i found the float was fouled by a coiled spring -- of the type used to stop gas siphoners. stuck in the full up position. I figured that i may as well replace it anyway, since i had gone this far and now the circuit works.
thanks for all the help in troubleshooting. my next project is to re-install the heater. previous owner removed for autocrossing.
