-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR5/TR250 Fuel line route
- Thread starter Hoodie
- Start date
Share this page
Marvin Gruber
Yoda
Offline
Pictures one and three look correct.
I believe the line should be on left side at the back. Where is the line out of tank at?
marv
I believe the line should be on left side at the back. Where is the line out of tank at?
marv
I ran it on the left side down from the tank tube following the frame. I routed it through the opening in the frame staying on the left side. The muffler goes through the same opening only it is on the right side. Coming out of the gap, I continued the route alone the left side forward to the gas pump where I will connect a fuel filter between the fuel line and the pump.
Second question Marv since you have restored TR250 vehicles. I have rubber strips that I believed were between the front fenders and the frame. I checked with Moss motors and they do not have anything like the rubber strips in their catalog or believe the stops belong there. Have you encountered these rubber strips in you work with these Triumphs? I'll include my phone number in this post.
Hoodie
850-897-3925
Hoodie
850-897-3925