• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Front top door sals

Share this page

R

RonR

Jedi Trainee
Offline
Folks,

Is there a trick to getting the top rubber door seals, at the ends of the dash, installed?
I assume one inserts the clips into the sheet metal first, and then, somehow, manages to get the seal engaged with the clip.
I am hopeing someone knows an easy way to accomplish this task.


Thanks.
Ron
 
Ron I just finished this task last week. I put the clip on the rubber first then starting at the back hole and worked through each hole out to the end. I used a pair of needle nose and pushed the metal clip into each hole as I went. Hope this helps.
 
Thanks, Randy. I wii give it a try tonight.
Getting the clips in the right position on the seal may be a trial and error thing.

I bought seals from Moss, and they appear to be smaller than what I took off the car. I am not sure the would ever matter with a true roadster.

Ron
 
Back
Top