• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

front hub removal

Share this page

19_again

19_again

Jedi Warrior
Offline
OK Guys, I've read through my old messages and Baz's about this and still have to post this question. My right front bearings went out as we were leaving for a ride on the first sunny day in 3 years, I've got the castellated nut off, the four nuts holding the outer hub assembly to the inner assembly (Bentley part #'s 64 and 67) but I still can't pull the hub off. Don't have the handy dandy hub puller, but reading the archives it doesn't seem necessary. I've got some bigger hammers, but I'm relying as always on the great wisdom of the forum. Wire wheels 67 B. It's red if that makes a difference :hammer:
 
If the nut & cotter pin are off & the big washer that's behind them is out & the caliper is off, it should pull off without a puller.
 
Back
Top