Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
bighealeysource
Luke Skywalker
Offline
Hey gang,
Now that I have good brakes back looking to install new front brake adjusters on my BN2. The 67 year old originals don't hold as tight as they used too so over time you lose some of the needed tension and results in poor brakes. Got the kit from David Nock with new "snail" cam adjusters.
The original is a press fit where the new kit is machine bolts and special washers, spring washers, etc. Before I go blindly forward and try to
take out the old snail cam unit, has anyone here installed this new kit?
Thanks.
Mike
Now that I have good brakes back looking to install new front brake adjusters on my BN2. The 67 year old originals don't hold as tight as they used too so over time you lose some of the needed tension and results in poor brakes. Got the kit from David Nock with new "snail" cam adjusters.
The original is a press fit where the new kit is machine bolts and special washers, spring washers, etc. Before I go blindly forward and try to
take out the old snail cam unit, has anyone here installed this new kit?
Thanks.
Mike