• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Free [almost] A Series Stand Adapter

Share this page

ChrisS

ChrisS

Jedi Knight
Country flag
Offline
I made up a few of the engine stand adapters yesterday for a member here and another friend of mine. Since I had everything set up I made 2 extras. If anyone wants them let me know. How much? Make a donation to the forum and I’ll send you one. Sound fair? PM me if you are interested. Here is a link to the adapter (2" pipe / 2-3/8" OD).
 
Boy, I could sure use one. I am new to the forum. Would $20.00 be a fair donation?

Please advise how to proceed.

Best regards,

Jim Hanks
 
Chris...please put me down for one also. Donations will be made. $20 sounds OK to me.

As Jim said, let me know how to proceed.

Also let me know how much shipping will be to the 08530 area


Thanks,
 
Thanks for the interest; they're all spoken for. If I make any more I'll let you know.
 
Chris maybe you should get into the side stand adapter business. YOu guys might want to let Chris know what the ID of the pipe is on your engine stand, they are not all the same.

Chris, if you ever wanted to start making MGB side stands, now there's a market, but it a little more elaborate than than a A seires side adapter because of the heavier block.
Somebody recently posted a picture of your adpater on the MGBexp site to do for a MGB, I warned them that a second pick up point was necessary for the MGB block.
 
Back
Top