Flare fittings to Master Cylinder

[TulsaFred]

The flare fittings that attach the brake and clutch lines to the master cylinder on the Bugeye are not reachable with a flare wrench because the MC is recessed into the body/inner fender.
Is there a special tool for this?
If I use a box end wrench at an angle, it seems like a high likelihood of stripping the fittings.

 

[smaceng]

I bought a tubing wrench for this....it still was not easy.
Scott in CA

 

[Trevor Jessie]

I purchase a flare wrench at autozone that had an offset large enough to work.

 

[bugedd]

I pulled the 2 bolts that hold the master in place when I worked on the lines.

 

[TulsaFred]

Maybe this would work:
https://www.harborfreight.com/7-pc-38-in-metric-crowfoot-flare-nut-wrench-set-68999.html

 

[TulsaFred]

FYI:

The Harbor Freight crow foot didn't work, not enough room for it.

This worked: https://www.amazon.com/gp/product/B0014ZYZ4M/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

 

[nomad]

FYI:

The Harbor Freight crow foot didn't work, not enough room for it.

This worked: https://www.amazon.com/gp/product/B0014ZYZ4M/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Didn't know such a cool little tool existed! Look's like a good addition to the tool box for anyone that fools with brake system's.

Kurt.

 

[Trevor Jessie]

I've got one that is flexible AND has an offset.

 

[Rut]

FYI:

The Harbor Freight crow foot didn't work, not enough room for it.

This worked: https://www.amazon.com/gp/product/B0014ZYZ4M/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I know what I want for Fathers Day!
Rut