• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Fender removal Advice

Share this page

JPSmit

JPSmit

Moderator
Staff member
Silver
Country flag
Offline
Hi there, me again. Well, I'm trying to remove the passenger side front fender which I understand bolts on. I have removed the bolts at the front, along the hood drip edge and the bolt approximately under the antenna into the firewall. It doesn't come, what am I missing? Is there a bolt attached lower on the firewall and if so, how do I get at it? Thanks for your help.
JP
 
I had the same issue.
The ones behind the kick panel Bugeye58 mentions were holding me up. You will see it when you get in there.
 
thanks for the help. yes I got the grill, it's the kick panel two that I was missing. (Actually I suspected they were there but didn't want to pull the kick panel without being sure.
thanks again
JP
 
OK, thanks for the advice, it's off. Now the drivers side. I have all the bolts off but one. I can see it when I pull the fender away from the body. It is along the flange at the back of the fender about half way up. To put it another way, it is above the bolt I extracted from the driver's kick next to the clutch. Unfortunatly I can't find the head of the bolt. help! where is it
JP
PS thanks for all your help y'all!
 
Never Mind, I found it.
 
Back
Top