• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Fender question

Share this page

regularman

regularman

Yoda
Country flag
Offline
When a fender is installed correctly, How much gap should thier be between the fender and the cockpit and how much gap in the radius between fender and rocker panel? Mine has about 3/16" on the former and 1/8" on the latter. Also should the fender be exactly flush with the rocker at the bottom and the A pillar on the side? My fender sticks out about 1/16" along the radius and a bit more on the side at the A pillar. I worked on the A pillar and replaced the bottom hinge area so I will have to fix that some I know.
 
Back
Top