Fastener list

[Billm]

OK- I know that a couple of years ago Frank C posted a list of the fasteners that he keeps in stock to rebuild Spridgets-
I can't find it and it isn't in the WIKI.
Can anyone find it for me? (and maybe put it in the WIKI?)
Thanks
BillM

 

[Jim_Gruber]

Here you go, recommendation is one box of each to start.


10-32 pan head 5/8" long
1/4 x 28 x 3/4" hex
5/16 x 24 x 1" hex
3/8 x 24 x 1.25" hex
SAE flat washers, split washers, and nuts for the above
Grade 5 is what was original.

 

[Billm]

Thanks Jim!

 

[apbos]

I think it is on Gerard's website. Sorry do not have it on hand as I am on my cell phone between calls.

 

[Gerard]

I think it isometric Gerard's website.

Correct Paul.

There are two very complete lists in my Tech section under "Specs" drop down menu.

 

[vagt6]

Gerard, congratulations on a fine website. Nice design,easy to navigate and tons of great info.

Cheers. :thumbsup:

 

[regularman]

Those cars are built on the quarter 28s. A good drill with the 1/4 28 tap to run through all the tapped holes sure makes things go back together easier too.

 

[taskadog]

It's amazing how much info is out there, and how much wisdom Frank Clarisi added to our hobby.
Here's to you Frank, drive it like you stole it!!
Phil

 

[Gerard]

Gerard, congratulations on a fine website. Nice design,easy to navigate and tons of great info.

Cheers. :thumbsup:

Thank you for the great feedback. Glad you find it helpful and easy to use.