Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
delisaj
Senior Member
Offline
I finally figured out a way to get the FASTEN belt indicator light to "work" on my TR6. I wanted to have the light come on for a short while and then automatically turn off, regardless if the belts were connected, or if anyone was in the seat, etc., since the seat belt wiring is long gone. Figured that would be good enough.
So, I purchaed a courtesy light delay module at https://www.americanautowire.com/products/
and wired it up using the existing wiring from that annoying iginition buzzer. The delay module also has a potentiometer to change the delay from 17 to 80 seconds.
So, now, when I turn the key and start, the Fasten Belt Light will illuminate for about 60 seconds, and then just fade off.
Oh, it is the little things.
So, I purchaed a courtesy light delay module at https://www.americanautowire.com/products/
and wired it up using the existing wiring from that annoying iginition buzzer. The delay module also has a potentiometer to change the delay from 17 to 80 seconds.
So, now, when I turn the key and start, the Fasten Belt Light will illuminate for about 60 seconds, and then just fade off.
Oh, it is the little things.
