Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
tr6nitjulius
Jedi Warrior
Offline
Non-technical, hands on method by Master British Mechanic Tracy:
Changed my belt last month in 15 minutes, without using jack, untightening cross member bolts, while '72 TR6 on jack stands, tranny in shop for rebuild. Tools needed long screwdriver or pry bar.
(1) Loosen alt/gen bolt
(2) Remove fan belt
(3) Move fan belt down over H20 pump
(4) Push fan belt down squeeze under cross member
(5) Pull fan belt up between crossmember & back of fan
(6) Once bottom of fan belt is free
(7) Squeeze bottom of fan belt between back of fan, steering rack & frame
(8) Pull fan belt out between front of fan & back of radiator. Reverse how to for re-install.
Tracy's experienced/knowledgeable Magic
Changed my belt last month in 15 minutes, without using jack, untightening cross member bolts, while '72 TR6 on jack stands, tranny in shop for rebuild. Tools needed long screwdriver or pry bar.
(1) Loosen alt/gen bolt
(2) Remove fan belt
(3) Move fan belt down over H20 pump
(4) Push fan belt down squeeze under cross member
(5) Pull fan belt up between crossmember & back of fan
(6) Once bottom of fan belt is free
(7) Squeeze bottom of fan belt between back of fan, steering rack & frame
(8) Pull fan belt out between front of fan & back of radiator. Reverse how to for re-install.
Tracy's experienced/knowledgeable Magic