• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Fabricating a hardtop for TR3

Share this page

L

LionelJrudd

Jedi Trainee
Country flag
Offline
Does anyone have clear drawings of a TR2-3 hardtop that would suffice to fabricate one from. Dimensions would be good. Thinking of buying the rear window and then making the hardtop. Not interested in a fibreglass hardtop. After making mudguards and other panels, I decided a hardtop should be quite doable.
Lionel.
 
Thanks Hamish. Would love to borrow one and will follow up with a few contacts. I have been collecting as many photographs as possible and worst case will build a buck with the rear window fitted then make the panels to fit. I have used this approach before, scaling from photographs and have found it can be quite accurate. This is a futures project and I am simply doing my research for now.
 
Back
Top