• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR5/TR250 Extra gaskets

Share this page

tinman58

tinman58

Jedi Knight
Country flag
Offline
Why is there always two gaskets for the front engine plate to the block supplied in the lower end kits? I can only find one location for the gaskets. One is very thin and the other is a little thicker. I have used the thick one, where does the extra one go other than on the shelf?
 
Actually your note just made my day, I have a gasket hanging from peg on my workbench and I wondered if I forgot to put one on when I reassembled the motor.

This is pure speculation, but there is a spec. for the end float of the camshaft. At the time I put the motor back together I noticed it was a little tight when I put the end plate that holds the cam in on. Maybe the gaskets are to allow adjustment of the float.

2nd theory I just thought of. Maybe a generic kit and one is for the TR6 motor and one for the GT6 block?
 
Back
Top