• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR4/4A Exterior of TR4 gas tank...inside OK

Share this page

K

karls59tr

Yoda
Bronze
Offline
Rust got to the top of the tank on the outside to the point where it was pitted but not bad enough where holes are an issue. I wire brushed the area and stabilized the rust with a chemical. Now I would like to skim coat the surface. Any Ideas on what to use.
 
POR15 would be one choice. Simple Rustoleum or Eastwoods Rust Encapsulator would be alternative choices.
 
Agree, but you should still seal the inside of the tank. It's a two or three step process, Most bike shops carry it around here, but the above mentioned also have one.

Wayne
 
Back
Top