Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
jlaird
Great Pumpkin
Offline
Mickey picked it up to save it from the crusher, and Joel brought it down, right to the door. He and his but set it out of the trunk onto my roll around stand. Boy that was easy, they even brought their own gloves. What super service, thanks guys.
So I took them to lunch on the beach and we watched the waves and the girls.
Engine is missing a valve cover and a timeing chain cover. If anyone finds an extra give me a shout.
Otherwise looks preaty good for a 40 plus year old lump.
It is free, turns easly. Looks like standard pistons in it. In any case no marking on the tops showing size. Is missing timeing gears and chain and lifters but they will be new anyway so not an issue at all. No telling what the bottom end looks like as it is too darn hot for me out there.
In anycase no rush at all this will be a hot spare as I get time and a buck or two. Expect it to take a year or so.
Overbore
Cam
295 head-have
HS2 SUs-have
1275 exhaust-have
Full balance
Lightened flywheel
Paint with correct color and clearcoat
Maybe it won't leak, ya, lots of luck.
The idea is to have it all look like stock on the outside. I know the carbs will give it away but no one knows what they are looking at that close but for you guys.
So I took them to lunch on the beach and we watched the waves and the girls.
Engine is missing a valve cover and a timeing chain cover. If anyone finds an extra give me a shout.
Otherwise looks preaty good for a 40 plus year old lump.
It is free, turns easly. Looks like standard pistons in it. In any case no marking on the tops showing size. Is missing timeing gears and chain and lifters but they will be new anyway so not an issue at all. No telling what the bottom end looks like as it is too darn hot for me out there.
In anycase no rush at all this will be a hot spare as I get time and a buck or two. Expect it to take a year or so.
Overbore
Cam
295 head-have
HS2 SUs-have
1275 exhaust-have
Full balance
Lightened flywheel
Paint with correct color and clearcoat
Maybe it won't leak, ya, lots of luck.
The idea is to have it all look like stock on the outside. I know the carbs will give it away but no one knows what they are looking at that close but for you guys.
